1、烷基聚氧乙烯醚琥珀酸单酯磺酸二钠是阴离子表面活性剂。

2、无 APE乳化剂，用于丙烯酸、苯丙和乙烯苯烯酸类乳液极佳的主乳化剂。

3、聚合物领域：适合于制备中等粒径的醋酸乙烯、醋丙和纯丙乳液。与N-羟共用，而不减少交联性能。与其它乳化剂配合使用，可有效改善颗粒尺寸，并产生较好的粘合性。

4、非聚合领域：具有杀菌力的清洗剂、化妆品和洗发液；发泡水泥、墙板和粘合剂；对阳离子表面活性剂和多价阳离子具有良好的承受力。对中等HLB值的树脂或颜料体系是良好的增溶剂和分散剂。

注：以上数据仅供参考。

1、建议用量0.5-5.0%，可单独使用。

2、为获得最佳性能，建议稀释后添加，使用量在很大程度上取决于应用体系，建议用户在使用前通过实验确定最佳添加量。

3、为避免发生凝胶，产品应在15℃以上储存。如果出现凝胶现象，应加温或加入适量水并搅拌使之全部溶解。

        200kg/桶 。贮存在常温下，避免阳光直射，不用时将容器密封。

       保质期：常温下可贮存12个月以上。

1. FTRT® SAA-102 is an anionic surfactant.

2. Contains no APE emulsifier and is an excellent primary emulsifier for acrylic, styrene and vinyl benzoic acid emulsions.

3. Polymer field: It is suitable for preparing medium-sized vinyl acetate, vinegar and pure acrylic emulsion. It is shared with N-hydroxyl without reducing cross-linking properties. Used in combination with other emulsifiers, it can effectively improve the particle size and produce better adhesion.

4. Non-polymerized field: It is suitable for sterilizing cleaning agents, cosmetics and shampoos, foaming cement, wallboard and adhesives, and has good tolerance to cationic surfactants and multivalent cations. A good solubilizer and dispersant for medium HLB resin or pigment systems.

Note: The above data is for reference only.

1. The recommended dosage is 0.5-5.0%, which can be used alone.

2. For best performance, it is recommended to add after dilution. The amount of use depends on the application system. It is recommended to determine the optimum amount by experiment before use.

3. To avoid gelation, the product should be stored above 15 °C. If gelation occurs, warm up or add an appropriate amount of water and stir to dissolve it.

200kg / drum. Store at room temperature, avoid direct sunlight, and seal the container when not in use.

Shelf life: It can be stored for more than 12 months at room temperature.